Best Motion Sensor Light for Illuminating Your Home

We’ve all gotten up in the middle of the night to use the bathroom or drink water and stubbed our toe on a fiendishly asymmetrical piece of furniture. And we all know how much it can hurt. You hop around the house in what can sometimes be excruciating pain while trying to come up with a simple solution for this common problem. This is where we come in. We will help you illuminate the dark corners of your life with our recommendations for the best motion sensor light on the market.

Our Top 3 Recommendations

FROM $17.99
FROM $14.22
FROM $14.99

Motion Detector Light Reviews

AMIR Motion Sensor Light

  • A 10-feet range

  • Relatively cheap

  • Turns off after 15 seconds

  • 5000K brightness

  • Small in size

If you’re looking for a super-bright LED light for your home, AMIR might be the right choice for you. The nightlight uses passive infrared sensors to detect motion and light sources. As such, it comes on only when there is no other source of light, preserving energy and improving battery life.

The best motion sensor light captures movement at 10 feet, triggering the lighting system. The LED light turns off after 15 seconds of inactivity, so make sure you place it at a convenient location.

The installation process is really simple, with double-sided adhesive pads and a built-in magnet. However, make sure you don’t install the light in a high-temperature room as it can lead to the melting of the adhesive. The light will just slide from your wall and possibly malfunction. Another important thing to remember during the installation is to make sure the distance between the products is more than 10 feet. If they’re too close to each other, their sensors will detect each other’s light, and at least one of them won’t work.

AMIR’s best motion sensor light bulb uses 3 AAA batteries that are simple to insert and replace. Just twist open the casing and place the batteries. The 6-pack bundle will cost you $21.99, which is slightly more than $3.67 per light. It is a rather affordable way to light up your household.

Albrillo Ceiling Light Motion Sensor

  • 2700K light

  • Saves 85% on your electricity bill

  • 360-degree beam angle

  • Turns off after 40 seconds

  • Potential difficulties with installation

Albrillo LED offers a high-quality ceiling LED motion sensor light that is perfect for every room in your home. The light automatically turns on when it detects motion and stays on for 40 seconds if no other motion is detected. That is plenty of time and won’t leave you stranded in the dark. However, Albrillo doesn’t save you as much battery life as other products because the light stays on longer. In case you require a light source for longer periods and prefer not to rely on motion detection, there is also the Always ON mode.

Their best motion detector light provides you with a warm 2700K white glow that is a lot lighter than the competition. The 18W LED light consumes 85% less electricity than traditional light. The light has a 360 degrees beam angle, while the detection angle is slightly smaller at 120 degrees. It can detect motion from up to 16 feet away.

The device is made of plastic and aluminum for increased durability and lifespan. The design, though elegant, is not very unique. It looks just like any ceiling lamp you’d find in an average household.

Since Albrillo’s indoor light is not a wireless motion sensor light, it is battery-free. It comes with a manual and all the necessary mounting equipment. That being said, the manual isn’t exactly great. Although the manufacturer claims it’s an easy DIY installation, you should know what you’re doing. Most of the complaints online are centered on a poor manual or unreliable accessories.

The product comes with an affordable price tag of $24.99, but you get only one light.

Mr Beams Motion Sensing Night Light

  • Movement detection at 15 feet

  • Lasts about a year

  • Easy installation

  • 4000K light is not exactly warm

Mr Beams best motion sensor night light covers about 10 square feet of space — enough for any household. This light system works slightly beyond that point and detects movement at 15 feet. To preserve battery life, the light turns itself off automatically after 30 seconds.

Thanks to the “dusk-to-dawn” sensor, this nightlight will turn on only when there’s no other light source. That way, it preserves energy and increases battery life. It’s worth mentioning that the Mr Beams motion sensor light casing is weatherproof, making it a great motion sensor outdoor wall light. The installation is fairly simple, thanks to the use of double-sided adhesive. Since it’s a battery-operated system, there are no cables or cords you need to handle.

Light up the staircase of your hallway without being too invasive on the eyes with Mr Beams’s 20-lumens night light. The LED color is 4000K, which is your standard white light. The product requires 4 AAA batteries that can last around a year if you have approximately eight activations per day. Obviously, this depends a lot on the location where you choose to put them. If you place them in a busy hallway, the eight activations won’t suffice.

The price of Mr Beams’ best LED motion sensor light is $27.21, and that gets you three high-quality lights. This means that you will pay less than $10 for each light, which is a good deal.


  • Modern design

  • Six LED lights

  • 10,000 hours lifespan

  • Devices can’t be put too close to each other

URPOWER motion sensor light will immediately win you over with a combination of a sleek design and affordable pricing. The device is battery-powered, so you need three AAA batteries for every sensor. The casing is made of acrylonitrile butadiene styrene — a common thermoplastic polymer that makes the product more durable.

When it comes to the motion sensor LED light, there are six in each device — an upgrade from the previous version with only four of them. The brightness of 22 lumens is enough to help you light up any staircase, hallway, or dark, inaccessible closet. The bulb’s life expectancy is around 10,000 hours. This translates into more than a year of constant work, which is rather impressive. The motion sensor detects up to 9.8 feet and automatically turns off after 20 seconds to save battery life.

The installation process is fairly simple — it includes adhesive strips and magnets, making it the best motion sensor LED closet light. However, if devices are placed too close to each other, they won’t work. This is important if you’re planning on using it in your closet or other secluded, compact place. Also, make sure you use quality batteries to ensure the device’s longevity.

The package comes with three motion sensor lights and costs $17.99. That’s just under $6 apiece, which is a bargain considering the quality you’re getting. The batteries are not included in this motion sensor porch light, but you get those adhesive strips for simple installation.

Vintar 16-Color Nightlight

  • A 16-color night light

  • Rechargeable batteries

  • The 170-degree motion detection

  • Waterproof design

  • Limited functionality

Vintar’s night light slightly differs from other products on the list as it can’t be used as a motion sensor outdoor light. It is used for illuminating toilet bowls with the help of a motion sensor. This small and compact device is placed right at the bowl rim to greet anyone intending to use it. Naturally, the casing is completely waterproof.

This light system uses rechargeable batteries that are generally considered environmentally friendly. A single charge via the USB cable will allow you to use the device for about two months straight, making it one of the best motion sensor lights among the battery-operated types.

Although the device is capable of 170-degree motion detection, it is preferable to install it facing the door. The sensor works only at night to help you conserve energy. You can choose one of the 16 LED colors and adjust brightness levels according to your preferences. If that is too dull for your lavatory adventures, you can always opt for the carousel mode, where the sensor shuffles through all 16 colors. The color changes every four seconds, so the party never stops.

This is undoubtedly one of the best motion detection lights for your toilet. The device also has an indicator that lets you know when it’s time to recharge it. If you want this piece of technology in your home, you will have to pay $14.99 on Amazon.

Zeefo Retro LED Night Light

  • Fully mobile

  • “Always on” switch

  • Retro design

  • Can’t be fixed

  • Somewhat expensive

Unlike most other entries on our list, Zeefo’s retro night light is completely mobile. It basically works like a motion-activated table lamp that you can place anywhere you want. The lamp offers the best motion sensor light switch that lets you choose between three modes — motion detection, always on, and off. It is a convenient switch that many similar devices don’t have.

As you may have guessed by the name of the lamp, the Zeefo table lamp design gives off a retro vibe. Because of its shape and size, the lamp can fit into any room in your home. What makes it the best indoor motion sensor light is that its LED lights don’t overheat, so it’s perfectly safe even for the children’s bedroom.

The motion sensor detects movement within 6 feet and turns off automatically after about 20 seconds of inactivity. The lamp brightness is 20 lumens, while the light warmth is 3000K resulting in a warm, yellowish tone. This is one of the reasons Zeefo is the best motion sensor light. It is soft enough for a night light and bright enough to help you see clearly.

Since it’s a portable lamp, there’s no installation involved. If necessary, you can open the plastic casing by simply undoing the only three screws at the device’s base. The motion sensor lamp costs $10.99 on Amazon.

OxyLED Magnetic Motion Sensor Light

  • Innovative design

  • The 13-feet detection

  • 0.5 W power consumption

  • Sometimes too bright

If you’re looking for a refreshing new design that is both innovative and beautiful, OxyLED might just be the thing for you. This product is considered the best wireless motion sensor light for plenty of different reasons.

The key feature of OxyLED light is the fully rotatable head. The sensor sits on a magnetic base that allows it to rotate 360 degrees. In addition, the head can be detached whenever you want and used as an improvised flashlight. The magnetic base can also be easily mounted on any metal surface or attached with the provided 3M adhesive strip.

The motion detection works within 13 feet and turns off automatically after 20 seconds of inactivity. If you want to utilize the device’s flashlight capabilities, you can turn on the constant light mode.

What makes OxyLED one of the best indoor or outdoor motion lights is that it draws only 0.5W. It’s not only cost-efficient but also safe for the entire family. There are five LED lights with adjustable brightness levels.

The light can be powered in two ways, so you can choose the one that suits you more. First, there’s a rechargeable lithium battery charged via a USB cable. In addition, you can also power the device with three AAA batteries.

This indoor and outdoor motion sensor light costs $51.99, which is a bargain for a product of such quality.

XYMO Motion Detector LED light

  • Beautiful design

  • 0.4 W power consumption

  • Removing backplate sometimes problematic

The polished steel finish of the XYMO motion sensor light makes it stand out from the crowd. It is a great way to illuminate a dark staircase or a hallway that doesn’t get much daylight. Since we’re talking about LED technology that doesn’t radiate excessive heat, the light is also a good choice for the kids’ room but not as much as a motion-activated outdoor light.

XYMO light is powered by three AAA batteries that are placed in the back. While the manufacturer argues that unscrewing the backplate is a simple process, reviews suggest that it’s not always easy because of the plastic components.

The device contains six LED lights that drain only 0.4W of power. In the long term, this makes it the best motion security light since it helps you save a lot of money. In addition, to preserve battery life, the device shuts down after 15–30 seconds of inactivity. As is the case with many other similar lights, this one also comes with adhesive strips and a built-in magnet. This allows placing the light onto any flat surface without the lengthy installation process.

You can get the XYMO’s best motion sensing security lights for $25 on Amazon. This buys you three motion-activated lights, which is enough for a single stairway or a small room. It isn’t the cheapest device, but it won’t exactly take a big slice of your monthly budget.

First Alert Motion Sensing Light Socket

  • Veterans in the field

  • Simple installation

  • Doesn’t provide you with the bulb

First Alert is a well-known brand of smart security-focused products that has been around for decades. Their approach to motion sensing light technology is a bit different from the other entries on our list. They went beyond by offering the best motion sensor security light and came up with a smart socket designed to fit your existing socket. As such, the installation is extremely simple and requires almost no effort on your part.

The first alert motion sensing light socket works with both fluorescent and incandescent light bulbs. However, one of the main problems with this type of design is that it doesn’t work too well with lampshades. A naked light bulb may not be visually appealing, but with this particular product, there is little you can do about it. The First Alert socket may not make for the best decorative outdoor motion sensor light, but it works well in areas where functionality matters more than aesthetics.

The 360-degree motion detection works within a range of 12 feet. What makes this device different from the competition is that it works both day and night. Another peculiarity is the automatic inactivity shutdown system. While most manufacturers spend their best efforts on trimming down a second or two, First Alert allows the light to stay on for four minutes with no motion detected. This is surprisingly wasteful on their part.

You can get this device on the manufacturer’s site for $14.22, but you might get a better deal on Amazon and other ecommerce sites. It’s the best motion sensor outdoor light bulb because it is simple, effortless to install, and gets the job done.

Wislight Motion Sensing Night Light

  • Elegant design

  • Brush silver aluminum case

  • ABS plastic

  • Expensive

  • Requires four AAA batteries

When it comes to elegant and stylish design, there aren’t many products that can compete with Wislight’s motion-sensing night light. The brush silver aluminum case is as sleek as it gets, especially when combined with the high-quality fireproof ABS plastic. Since it’s one of the best battery-operated outdoor motion sensor lights, the installation is fairly simple, with no wiring involved. You can install it anywhere using screws or 3M adhesive strips. While most of the competitor devices require only three AAA batteries, this one needs four.

Wislight’s motion-sensing night light detects activity at 10 feet and a 100-degree angle. The light temperature is a standard 4000K. After 30 seconds of inactivity, the light automatically turns itself off to preserve energy, making it an efficient and best outdoor motion sensor light. You can make it even more efficient by choosing between low and high brightness levels. The built-in sensor only turns the light on at night when there are no other light sources available.

The device costs $10.98 on Amazon, which might be a bit pricey for a single motion sensor light. Then again, you’ll rarely stumble upon a product that looks this good.

Why the Motion Sensor Light?

Because this is the future. The days of searching for a light switch in dark rooms are behind us. Affordable motion sensors turn on the lights when you enter the room and turn them off once you leave to preserve energy. If leaving lights on is one of the annoyances causing arguments in your household, prepare yourself for a period of absolute serenity.

However, before we get into the best outdoor security lights reviews and other motion sensor light reviews, we need to tell you about our evaluation process.

Evaluation Process

Here is a quick rundown on some of the elements we take into consideration when reviewing these products:

  • Functionality

Naturally, the first thing we look at is the basic functionality of the device. What type of sensor are we dealing with? What’s the range and sensitivity? What is the level of brightness and color of the light? These are all the indoor or outdoor motion sensor light specifications you need to know before deciding to buy a particular product.

  • Special Features

Once we’re done with the basics, it’s time to dig a little bit deeper. Yes, we’re talking about special features. Keep in mind that this is a simple device with simple functionality. If it does its job well with no special features, that’s perfectly alright. However, if it has something more to add to the table, such as the best solar motion sensor light, we certainly welcome it.

  • Installation

Of course, all this is for nothing if you can’t install the device yourself. We ensure that the very best motion detector lights also offer an easy-to-understand manual and step-by-step guidance. We want you to enjoy the nighttime lighting as soon as it comes out of the box.

  • Price

We leave the price for the end not because it’s the least important element but because we feel you first need to find out what you’re buying. There’s no point in overwhelming you with a price right away when you don’t know what it’s for. Whenever possible, we will mention special bundle discounts or lower prices in other online stores.

Frequently Asked Questions (FAQ)

How do you trick a motion sensor to stay on?

If the device doesn’t have the light switch with the Always On option, you will have to perform a well-known trick. Basically, if you turn off the device and then turn it on as quickly as possible, it will override the motion detection system and keep the light on at all times. If you want to go back to the old regime, just turn it off again and wait approximately 10 seconds before turning it back on. The maneuver will reset the device and bring everything back to normal.

What is the best motion detector light?

It depends on your budget and what you are looking for. Amir’s motion sensor lights are relatively cheap and offer a reliable light source at night. However, if you feel like spending a bit more on a sleek design, the motion sensor light for you might be Wislight. If you’re looking for a brand with an established reputation, you can’t go wrong with First Alert. Our personal favorite is OxyLED magnetic sensor light with a fully rotatable head that can be used as an emergency flashlight.

How do I choose a motion sensor light?

When choosing the appropriate motion sensor light for your home, you should consider a few factors. First is your budget and how much you’d be willing to spend for a high-quality motion sensor light. Secondly, ask yourself what power source you prefer — solar, battery, or a power outlet.

Thirdly, think about the main purpose. Do you want to get motion detector lights for visibility, security, or decoration? Additionally, the lights’ installation should be taken into consideration as well. Can you afford to get a professional to install the lights for you, or self-installation is the better route.

These factors will help you determine the range of products you can choose from, so take the time to consider your priorities, set a budget, and read product reviews before purchasing motion sensor lights for your home.

How long do motion sensors last?

The batteries in motion sensor lights can typically last for up to a year. However, it can still vary depending on how and where the light is used. It can be difficult to pinpoint exactly how long the mentioned sensor lights last, but some factors have been identified. One factor is the location of the light. For example, those placed in less frequented areas, such as sheds, basements, and attics, are bound to last a few months or years longer than those in heavily-trafficked areas.

Are motion sensor lights worth it?

If you’re looking to install motion sensor lights in your home to deter burglars, then it is totally worth it as it can have a startling effect on criminals. Burglars instinctively feel that they’re caught in the act and flee before causing any damage. You can also connect the sensor to other smart devices that will sound an alarm, or you will get a notification when an unknown person triggers it.
Just make sure to buy only the best motion sensor light that will be worth the investment for your home.